Metal Sheet Decorating

B 1120 (5)
B 1120 Line

MAILÄNDER Coating Line

Descripción

LTG/MAILÄNDER coating line with a working speed of 5000 sheets per hour.  Max. sheet size: 1145 x 965 mm.

The coating machine is used for spot coating.

Detalles
MAILÄNDER
770
Feeder
(1986)
MAILÄNDER
464
Spot Coating machine with solvent suction hood
(1986)
LTG
DBL
Gas drying oven with fume incinerating system
Length 24 m
Cooling zone 4 m
Max. solvent capacity 50 kg per hour
LTG
Stacker
Notas

The line is still producting.

B1107 (4)
B 1107
MAILÄNDER
447

Coating Machine

Descripción

Semi-automatic coating machine for a max. sheet size 970 x 760 mm

Detalles
MAILÄNDER
447
Coating machine with operation panel, exit table and suction device as well as small and large sheet trolleys
B1084 (5)
B 1084
MAILÄNDER
122

Double Color Printing Machine with Inline Coating Machine

Descripción

Double color printing machine with inline coating machine for solid coating only.

Max. sheet size 1145 x 965 mm

Detalles
MAILÄNDER
122
Double color printing machine with GRAFITEL automatic remote control inking unit
(1990)
MAILÄNDER
469
Coating machine for solid coating only
(1989)
Notas

Scope of delivery does not include an oven.

The machines are already dismantled.

B 1087 (6)
B 1087
MAILÄNDER

Double Color Printing Machine with Inline Coating Machine

Descripción

Double color printing machine with inline coating machine for solid coating only.

Max. sheet size 1145 x 965 mm

Detalles
MAILÄNDER
Sheet feeder Typ 760
MAILÄNDER
162
Double color printing machine including TG color remote control inking system and sheet ejection system with re-insertion
(1983)
MAILÄNDER
460
Coating machine for solid coating only
(1983)
Notas

Scope of delivery does not include an oven.

The machines are already dismantled.

B 1097 (1)
B 1097
IST
BD-133-4S

UV-Dryer

Descripción

4 lamp end dryer (set stack) 2 x 1 lamp interdeck dryer

Detalles
IST
BD-133-4S
4 lamp end dryer (set stack) 2 x 1 lamp interdeck dryer
(2009)
B1105 (2)
B 1105
LTG

Sheet Stacker

Descripción

Max. loading capacity: 3000 kgs, max. sheet size: 1150 x 980mm

 

Detalles
LTG
Sheet stacker
(1990)

Pre-Press Equipment

B 1047 (1)
B 1047 Line

CREO Trendsetter VLF 4557 - CTP Line

Descripción

CTP Line for inhouse processing of printing plates. Machine is in working condition.

Detalles
CREO - KODAK
Trendsetter VLF 4557
Plate Setter
(2000)
HAASE
Gumming machine
(2000)
HAASE
Drying oven
(2000)
Notas

A technician can help you with the installation at your production site.

The line is suitable for: Min. Plate Size: 15,5 x 20″ (394 x 508 mm);

Max. Plate Size: 45 x 57″ (1143 x 1448 mm)

The Trendsetter will be delivered without RIP. Suitable RIP would be Navigator RIP v12.x (Trendsetter RIP-Kit)

B1046NEU (4)
B 1046-2
IST

UV Dryer

Descripción

UV drying previously used with proofing press.

Detalles
IST
UV-Drying oven previously used with proofing press
(2002)
Number of lamps 2
Wattage 120 W / cm each
Notas

Oven is connected and can be shown in a dry-run in our warehouse.

D1588E-2
B 1104
KORREX
02

Proofing Press

Descripción

Good working conditions

Detalles
KORREX
02
Proofing press
(1996)
Max. printing size 500 x 700 mm
Max. sheet size 520 x 720 xmm
Max. plate size 580 x 770 mm
Notas

Including chilling unit

B986 (2)
B 986
KODAK
Approval XP4

Digital Proofing System

Descripción

The KODAK XP4 proofing system will create reliable proofs in consistant quality helping you to reduce downtime and saving costs at the same time.

Detalles
KODAK
Approval XP4
Digital Proofing System with 4 colors
(2004)
Output resolution 2400 dpi
Notas

KODAK Approval XP4 creates the film and the KODAK Laminator 800 XL Professional laminates the film onto the substrate.

Sheet Processing Equipment

CCL-3 (3)
CCL Line

Coil Cutting Line

Descripción

Brand new fully automatic coil cutting lines available from a speed range of 70 cuts/min to 175 cuts/min depending on customer’s requirements.

Detalles
Downender
Hydraulic loading cart
Automatic hydraulic uncoiler
Feeder
Flattening unit
Appearance inspection
Transition stander
Quick changing die scroll shear with servo feeder & servo discharger
Belt conveyor
Stacker
Hydraulic elevating platform
Roll conveyor
Die handling cart
Notas

With many options available such as: Upender, Pinhole detector, additional stackers, digital inspection table, thickness gauge. Straight cut and scroll cut possible.

The following material can be used: Aluminium and tinplate coils

From an annual consumption of 10.000 tons a coil cutting line is profitable.

M022 (2)
M022
LITTELL

Coil Cutting Machines

Descripción

Individual second-hand coil cutting machines

Detalles
LITTELL
Coil car
Max. coil weight 10 tons
LITTELL
Uncoiler
Max. coil weight 10 tons
LITTELL
Straightener
Max. coil width 1050 mm
LITTELL
Visual inspection table
DS-1
DS

Duplex Slitter

Descripción

Brand new fully automatic duplex slitter for body blank cutting of 3-piece cans.

Detalles
1st feeding platform
HENGLI
High-precision slitter (I)
Max. 1st slitting quantity 6 strips
Min. 1st slitting width 126 mm
HENGLI
2nd feeding platform
HENGLI
High-precision slitter (II)
Max. 2nd slitting quantity 10 strips
Min. 2nd slitting width 60 mm
HENGLI
Auto-stacker
Notas

Additional technical parameters for the line:

Sheet thickness range: 0.12 mm – 0.5 mm
Sheet width range: 600 mm – 1200 mm
Max. tolerance: +/- 0.02 mm
Max. diagonal tolerance: +/- 0.05 mm
Max. line speed: 30 sheets/min

Closure Production

cof
B 1124 Line

SACMI Production Line for Crown Corks

Descripción

Complete production line for crown corks. Sheet size 1113,5 mm x 893 mm  for short crowns 6,1 mm with a liner profile 923 available.

Detalles
SACMI
PTC 27
Crown Cork Press PTC 027
(2017)
Stroke 27
Crowns out 29
Crowns per sheet 783
Speed 330.000 crowns per hours
SACMI
PMC 250
Liner with CVS 3000 of year 2010
(2000)
SACMI
PMC 250
Liner with CVS 3000 of year 2010
(2004)
SIAT
Carton Filling and packing unit
Notas

Many accessories, the complete QC-Equipment and new spare parts are available. The line is still installed.

Please contact us for more details, photos and videos.

B 1022
B 1022
SACMI
PTC 170

Sheet Press for Crown Cork Production

Descripción

Sheet press for crown cork production.

Detalles
SACMI
PTC 170
Sheet press for the production of crown corks
(2001)
Sheet dimension 811,5 x 573 mm
Crowns per sheet 357
Press output at 172 strokes / min 2800 pc / min
Total power requirement of machine 9,14 KW
Voltage 380 V
Hertz 50 Hz
Compresses air requirements 500 dm³ / min at 5 bar
Machine weight including die set and feeder 58 kN
Notas

The press can be inspected at the original production plant.

B1089 (1)
B 1089
SACMI
PMC 250

Crown Cork Liner

Descripción

Complete SACMI PMC 250 crown cork liner with profile 916. A CVS video inspection system is included in the scope of delivery.

Machine was overhauled in 2019 and can be inspected for a test production.

Detalles
SACMI
PMC 250
Complete crown cork liner with profile 916 with CVS video inspection system
(1994)
Notas

Optional Industrial Frigo GR1AC 80/Z/X/Z available for usage of PVC-free compound.

B 920-1
B 920 – 1
NEUHÄUSER

Magnetic Conveyor

Descripción

Magnetic conveyor 2200 mm x 1250 mm used in production of crown corks

Detalles
NEUHÄUSER
Magnetic conveyor
B 920-2 (2)
B 920 -2
CHEMAPERM
Type 76697

Magnetic Elevator

Descripción

Magnetic elevator used in production of crown corks

Detalles
CHEMAPERM
Type 76697
No Image
B 920 -3
SSS
67 S

Inspection Belt

Descripción

Inspection belt used for visual inspection of crown corks.

Detalles
SSS
67 S
Inspection belt
No Image
B 1130
BORTOLINKEMO

Presses For Aluminium Closures

Descripción

4  presses with various toolings for aluminium closures e.g. 4-fold tooling LC28x38 , LC28x44, LC31,5×44 and many more.

 

Detalles
BORTOLINKEMO
Press with press stroke 160 mm
(2004)
4-fold tooling various types
3-fold tooling TC LC 30x60 1 stroke
Spare parts for tooling various available
Chiller suitable for up to 4 presses
Single Slitter
Notas

The presses can be seen in production. Please note geographical sales restictions exist for these presses.

 

B911 (1)
B 911 Line

NAROSKA Liner for Aluminium ROPP Closures with PVC Plastisol

Descripción

For screw caps diameter 28 mm.
Height 13 mm up to 15 mm.
Performance: 220.000 caps / hour

Detalles
DATZ
Hopper with storage bins
NAROSKA GAV
4 S 2
Liners
(1980)
BIAGOSCH & BRANDAU
PVC-dispensing unit (stainless steel)
B1007 (5)
B 1007 Line

NAROSKA Liner for Aluminium Ropp Closures with PVC Plastisol

Descripción

For screw caps diameter 28 mm.
Height 13 mm up to 15 mm.
Performance: 220.000 caps / hour

Detalles
DATZ
Hopper with storage bins
NAROSKA
GAV 4S
LINER
(1980)
BIAGOSCH & BRANDAU
PVC-dispersing unit (stainless steel)
B 1069 (1)
B 1069
SACMI
CCE 60

Counting Units

Descripción

Counting units used for aluminium screw caps

Detalles
SACMI
CCE 60
Counting units for aluminium screw caps
Notas

Machines are in good working conditions

OLYMPUS DIGITAL CAMERA
B 1072

Rolling Machines for Aluminium Closure Production

Descripción

6 rolling machines – 3 suitable for returnable bottles and 3 suitable for disposable bottles

Detalles
M025 - For closure RC 28 5-fold for returnable bottles
M026 - For closure 28 GD SK5 for returnable bottles
M027 - For closure GDS 5 SP for disposable bottles
M028 - For closure GDS 5 SP for disposable bottles
M029 - For closure RC 28 5-fold for returnable bottles
M030 - For closure SP for disposable bottles
Notas

Number of rolling heads.: 8

Speed: approx. 500 pieces / minute

No hopper, feeder, documentation or spare parts available

B1040.1-3
B 1040-1
GRACE

PVC-Liner and Drying Oven for Twist-off Caps

Descripción

Liner and continuous drying oven for the production of twist-off closures. Suitable for diameter 48 mm and 53 mm.

Detalles
GRACE
Lining machine
Diameter 48 mm and 53 mm
NEITZ
Continuous drying oven
Width drying belt 1,0 m
Diameter 48 mm and 53 mm
Max. speed for diameter 53 mm 500 pcs/min
B1040.2-2
B 1040-2
GRACE

PVC-Liner and Drying Oven for Twist-off Caps

Descripción

Liner and continuous drying oven for the production of twist-off closures. Suitable for diameter 63 mm and 66 mm.

Detalles
GRACE
Lining machine
Diameter 63 mm and 66 mm
TAB
Continuous drying oven
Width drying belt 1,2 m
Max. speed for diameter 66 mm 800 pcs/min
M037-1
M037
TEMA
CCI

Inspection System

Descripción

Fully automatic in-line inspection of lids and caps by an optical inspection system.

Detalles
TEMA
CCI
Inspection system
(2018)
Max. diameter lids 230 mm
Max. speed 2000 pieces per minute
Notas

The systems is used to detect relevant error types  e.g. compound error, scratches, deformations, dents/buts, stains, edge error and dimensional diviations.

Please contact us for more details.

B1074drawing
B 1074 Line

NESTECH Complete Production Line for Plastic Closures

Descripción

Complete production line for V3 Sport Cap from CAP/Shell body to final inspection

Detalles
NESTECH
Complete production line for V3 Sport Cap from CAP/Shell body to final inspection
(2005)
Speed 420 pieces/minute
Notas

Run hours: 20.000 only

Camera systems: Genius (final inspection,) Cognex (sligher height)

Pic 1 Body Fold Slit front Assembly mid Wad back left Pack back right
B 1073 Line

SACMI Complete Production Line for Plastic Closures

Descripción

Complete production line for closure type: 38mm Flat Cap slitting, folding, lining conversion line.

Detalles
SACMI
Complete production line for plastic closures
(2000)
Speed 500 pieces /minute
Notas

Camera systems: Genius (final inspection)

Complete set of 4 dies available.

B 1106-1
B 1106 Line

SACMI Production Linie for Plastic Closures

Descripción

Compression moulding line for 2-piece closures type HL 3 CSD. Size of closure 28 mm x 20 mm

Detalles
SACMI
CCM 01
Compression moulding machine
(1997)
SACMI
TVC 003
Folding machine
(1997)
SACMI
BTA 002
Cutting machine
(1997)
SACMI
PMV 200
Compound lining machine
(1997)
TAMPOPRINT
SK 96
Laser printer
(2007)
Notas

Total working hours: 114.000 hrs

Max. speed of the line 400 closures per mintue

B1140 (2)
B 1140
DIETZ & ROLLWA
ESG 400/ 500 BB

Elevator

Descripción

Vertical elevator with integrated hopper belt suitable for plastic closures. It is equipped with a cross belt at the top to convey the closures into two vibrators.

Detalles
DIETZ & ROLLWA
ESG 400/ 500 BB
Elevator
(2002)
Feed width 400 mm
Bunker volume 500 l
Notas

Electrical data: 230 / 400 V, 50 cyles, 0,09 kW

Aluminium Tube Production

No Image
T 1161 Line

Production Line for Collapsible Aluminium Tubes

Descripción

Production line for collapsible aluminium tubes for a diameter range from 25 mm to 40 mm for sale.

 

Detalles
Slug elevator
HERLAN
P6 L
Extrusion press
(1963)
MARTINENGHI
TTS
Trimming machine
(1980)
SPRIMAG
TGO 45/150
Annealing oven heated with gas
(1980)
SPRIMAG
HIL-26
Internal laquering machine with 6 spraying guns
(1982)
IMF
Drying oven for internal lacquer heated with gas
(1984)
METZGER
Accumulator
(1980)
MONTOLI
M2/T2
Base coating machine
(1978)
TUBETTIFICIO LIGURE
Drying oven heated with gas
(1980)
MONTOLI
DS2/BT2
5-color printing machine
(1978)
MONTOLI
R2/BF/T2
Capping machine
(1977)
MONTOLI
102/BF/T2
Latexing machine
(1979)
ZAMBELLI
Packing machine
(1980)
Notas

Production speed: 90 – 100 tubes per minute.

The line can be seen in production until summer 2020.

More details and video are available upon request.

DIGITAL CAMERA
M 034

Various Slug Tumbler

Descripción

Various slug tumbler models overhauled for different filling quantities and with new electrical cabinets available

Notas

If not on stock, the working time for overhaul is approx. 6-8 weeks.

T 1167
T 1167
MARTINENGHI
TTS

Trimming Machine

Descripción

Fully equipped trimming machine with size parts 25 mm – 28 mm – 30 mm – 31,2 mm and 32 mm.

Detalles
MARTINENGHI
TTS
Trimming machine
(1977)
Production speed 90 - 100 tubes per minute
Notas

Machine is connected and can be shown in a workshop.

T1079 (4)
T 1079
SPRIMAG

Annealing Oven, Internal Lacquering Machine and Internal Lacquering Oven

Descripción

Good internal lacquering unit, partially overhauled and equipped with various new parts for tube diameter range 13,5 – 25 mm

Detalles
SPRIMAG
Synchronization Unit
(2000)
Max. speed: 150 tubes / minute
SPRIMAG
TGO 25-150/2.1
Annealing oven equipped with new sprockets
(2000)
SPRIMAG
HIL 26
Internal lacquering machine with 6 spraying guns type S-233 with extension; gun cleangins system, lifting curve as well as swivelling curve, chain and chucks are new.
(2000)
SPRIMAG
TIT 25-150/4,5
Electrical drying oven equipped with new chain and sprockets
(2000)
Notas

Full details upon request

T1077 (8)
T 1077
SPRIMAG
HIL 32T

Internal Lacquering Machine

Descripción

Internal lacquering machine which used to work with 6 spraying guns and intermediate drying unit (electrically heated)

Detalles
SPRIMAG
HIL 32T
Internal Lacquering Machine
(1983)
Spraying guns 6
Tube diameter range 25 mm - 55 mm
Production speed 150 pcs/min
Electricity 380V / 50 cycles
Notas

Available size parts: 30 mm – 35 mm – 40 mm and 50 mm

Gun control equipped with Siemens S7 plc

T1122 (7)
T 1122
SPRIMAG
HIL 06

Internal Lacquering Machine

Descripción

Internal lacquering machine which used to work with 4 spraying guns. Production line covered a diameter range from 28 mm – 40 mm.

Detalles
SPRIMAG
HIL 06
Internal lacquering machine
(1980)
Speed 120 tube / min
Gun stroke 250 mm
Voltage 380 V
Hertz 50 Hz
Notas

Spraying guns are missing

T 1099 SPRIMAG_TIT serial number
T 1099
SPRIMAG
TIT 45-120/4

Internal Lacquering Oven

Descripción

Electrical lacquering oven which used to work in a production line covering a diameter range from 25 mm – 30 mm.

Detalles
SPRIMAG
TIT 45-120/4
Lacquering oven
(1973)
Speed max. 120 tpm
Drying time 4 min
Max. tube diameter 45 mm
max. tube length 220 mm
T1125 Dekoofen installiert
T 1125
MALL
TA40/120

Decoration Oven

Descripción

Decoration oven with electrical heating used to work in a production line with diameter range 28 mm – 40 mm.

Detalles
MALL
TA40/120
Drying oven
(1980)
Diameter range 28 mm - 40 mm
Tube length 120 mm - 220 mm
Production speed 120 tubes per minute
Elecricity 380 V / 50 cycles
Heating electrical
T1013 (1)
T 1013
DIETZ & ROLLWA
ESG 150 / 300 KF

Cap Feeder

Descripción

Cap feeder transports the closures into the capping machine

Detalles
DIETZ & ROLLWA
ESG 150 / 300 KF
Cap feeder
(1994)
Voltage 230 V / 400 V
Hertz 50 Hz
Power 0,12 kW
M038-1
M038
TEMA
PI-Cylinder

Inspection System

Descripción

Fully automatic in-line control of the printing on round bodies such as tubes etc. by means of an image processing system.

Detalles
TEMA
PI-Cylinder
Inspection System
(2018)
Type Aerosol cans / tubes
Max. diameter 66 mm
Max. length 260 mm
Notas

The systems is used to detect relevant error types e.g. color changes, wrong color, missing color, offset of text and graphic elements – shift, distortions, inhomogenous varnish, blister formation, paint splashes and stains and missing print or missing parts in print.

Please contact us for more details.

 

 

 

 

T 1140 (1)
T 1140
SPRIMAG

Packing Machine

Descripción

Tube packing machine

Detalles
SPRIMAG
Tube packing machine
(1996)
Diameter range 19 mm - 40 mm
Tube length (total length) 73 mm - 200 mm
Speed up to 150 tpm depending on the tube model
Power approx. 2,5 kW
Air pressure Approx. 5 bar

Plastic Tube Production

Aerosol Can Production

B1132 (13)
B 1132 Line

Complete Aerosol Can Production Linie

Descripción

Aerosol Can Making line equipped with tooling for diameter 65 mm

Detalles
CAN MAN
CM16-250
Welder with cooling unit
(2012)
Welding speed 550 meter per minute
Max. production speed 250 cans per minute
Diameter range 52 - 155 mm
Height range 70 - 320 mm
NSM
Conveyor
(1994)
LANICO
CF 381
Body Former
(2012)
Diameter range 45 - 109 mm
Height range 70 - 320 mm
Max. speed 240 can per minute
WILCO
R24AE
Leak tester
(1994)
High pressure test with 6 bar
Max. speed 240 cans per minute
CLEVERTECH
Palletizer
(1994)
A 402 (4)
A 402
HERLAN
CP85

IMPACT EXTRUSION PRESS

Descripción

CP85 for diameter range 35 – 66 mm.

Detalles
HERLAN
CP85
Impact extrusion press
(1988)
Nominal power 4000 KN
Stroke 375 mm
Speed 150 pieces per minute
Electrical data 400 V - 50 Hz
A409 (3)
A 409
RHODES
KJX 35

Impact Extrusion Press

Descripción

Maximum extrusion capacity: 35 mm diameter with a variable speed of 100 to 200 cpm.

Detalles
RHODES
KJX 35
Impact extrusion press
(2003)
Pressure capacity 100 tons
Stroke 300 mm
Notas

Electrical supply 380V / 3-phase/ 50 cycles.

A 426 (12)
A 426
MARTINENGHI
NNS 150/66

Trimming Machine

Descripción

Trimming machine for 45 – 66 mm diameter range available.

Detalles
MARTINENGHI
NNS 150/66
Trimming machine
(2001)
Max. speed 100 - 120 cans per minute
Can length 225 mm
A420 (36)
A 420
HERLAN
SBB

Trimming Machine

Descripción

HERLAN SBB Trimming machine for diameter range 22 mm – 66 mm. Equipped with size parts for diameter 45 mm

Detalles
HERLAN
SBB
Trimming machine
(1981)
Notas

Control: Siemens S7. The machine is connected, but not working in production any longer.

A401 (5)
A 401
SPRIMAG
HIL 10

Internal Lacquering Machine with Internal Lacquering Oven

Descripción

Sprimag HIL 10 internal lacquering machine, overhauled in 2013, with CCL internal lacquering oven of year 2014

Detalles
SPRIMAG
HIL 10
Internal lacquering machine
Number of spraying guns 6
Speed Max. 140 cans per minute
Diameter range 35 mm - 53 mm
Available size parts 35 mm, 38 mm and 49 mm
CCL
Internal lacquering oven, never used
(2014)
Speed Max. 140 cans per minute
Diameter range 35 mm - 53 mm
Notas

Both machines have not yet worked together in production

A377 (5)
A 377
POLYTYPE

Printing Machine

Descripción

6-color printing machine lately operated as proofing press for aerosol monobloc cans

Detalles
POLYTYPE
6-color printing machine
(1989)
Production speed max. 150 cpm
Diameter range 35 mm - 53 mm
Control S5
Notas

Available size parts: 35 mm – 38 mm – 45 mm – 50 mm – 53 mm

A430 (1)
A 430
HERLAN

Overvarnishing Machine

Descripción

Renewed PLC system offers reliable working conditions to this overnarnishing machine

Detalles
HERLAN
Overvarnishing machine type NLR
(1980)
Diameter range 35 mm - 66 mm
Coating range 80 mm - 120 mm
Speed 120 cans per minute
A 424 (2)
A 424
NUSSBAUM
EM36

Necking Machine

Descripción

The machine is available in the second quater of 2020. Inspection in production is possible.

Detalles
NUSSBAUM
EM36
Necking machine
(1987)
Produced diameter 40 - 53 mm
Station 24
Notas

Machine is equipped with SIEMENS S5 upgrade to S7 possible upon request.

Can Making

B11029 (11)
B 1129
SCHULER
ADG3

Beading and Thread Rolling Machine

Descripción

Used for the produciton of screw tops, PP tops, shoe polish tins and similar components.

Detalles
SCHULER
ADG3
Beading and Thread rolling machine
Speed max. 210 pieces per minute
Min. diameter 12 mm
Max. diameter 120 mm
Max. uncut length 60 mm
Max. sheet thickness 0,5 mm
B 1137 (10)
B 1137
BONFIGLIOLI
KBA 12036

Leak tester for Aerosol Cans

Descripción

36 station leak tester for a diameter range of 45 mm – 65 mm. Machine can be seen in production.

Detalles
BONFIGLIOLI
KBA 12036
Leak tester for Aerosol Cans
(2014)
Production speed 250 cans per minute
Infeed direction from right to left
Max. can length 320 mm
Diameter range 45 mm - 65 mm
Number of stations 36
A414 (2)
A 414
WILCO
Wilcomat R 36 AE

Leak Tester

Descripción

36 station leak tester for diameter range 45 mm – 53 mm

Detalles
WILCO
Wilcomat R 36 AE
Leak tester
(2000)
Speed 300 cans per minute
Max. can length 203 mm
Air pressure connection 8 - 12 bar
Voltage 3 x 400 V + N
Power requirement 1700 VA
A 415 (2)
A 415
WILCO
Wilcomat R 12

Leak Tester

Descripción

12 station leak tester for diameter range 45 mm – 53 mm

Detalles
WILCO
Wilcomat R 12
Leak tester
(1998)
Speed 150 cans per minute
Max. can length 203 mm
Air pressure connection 4 - 6 bar
Voltage 3 x 400 Volt
Power requirement 561 VA
B 1131 (5)
B 1131
RD-80N

INSER ROBÓTICA Palletizing System

Descripción

Fully automatic flexible palletizer system for staight & necked-in aerosol cans.

Detalles
RD-80N
KAWASAKI Palletizing robot
(2014)
Number of axes 5
Mechanical twin grippers for 2 rows of cans
Cardboard placement between layers of cans
SIAT
VR/4
Fully automatic strapping system
(2014)
Notas

Can diameter can be: 52 mm or 65 mm

Can height from 112,5 mm to 313,5 mm

Max. production speed: 250 cans per minute

Pallet dimensions: 800 x 1200 mm

B1125 (1)
B 1125
NSM
LPZ-2300-R

Palletizer

Descripción

Fully automatic can palletizer for can diameters 73 mm – 108 mm.

Can heights from 68 mm  – 250 mm. Now set up for diameter 99 mm

Detalles
NSM
LPZ-2300-R
Palletizer
(1998)
Max. speed 300 cans per minute
Layers 2-3 layers per minute
Control S5
Notas

Pallet sizes: 1200 x 800 x 138mm / 1200 x 1000 x 138 mm / 1250 x 1150 x 140 mm – heights including pallet: 2300 mm

B1126 (1)
B 1126
NSM
LPZ-2300-R

Palletizer

Descripción

Fully automatic can palletizer for can diameters 73 mm – 108 mm.

Can heights from 68 mm  – 250 mm. Now set up for diameter 108 mm

Detalles
NSM
LPZ-2300-R
Palletizer
(1999)
Max. speed 300 cans per minute
Layers 2-3 layers per minute
Control S5
Notas

Pallet sizes: 1200 x 800 x 138mm / 1200 x 1000 x 138 mm / 1250 x 1150 x 140 mm – heights including pallet: 2300 mm

Accesorios

HOCHBACH GmbH /
HOLAC

Raiffeisenstr. 16
70771 Leinfelden-Echterdingen
Alemaña

Teléfono: +49 711 / 9 03 76-0
Telefax: +49 711 / 9 03 76-20

info@hochbach.de
https://www.hochbach.de

Personas de contacto

Uwe Gregorius
ug@hochbach.de
+49 711 / 9 03 76-19
Géraldine Gaillard
gg@hochbach.de
+49 711 / 9 03 76-12
Patrik Schmitt
ps@hochbach.de
+49 711 / 9 03 76-24
Christiane Lechler
cl@hochbach.de
+49 711 / 9 03 76-17