Metal Sheet Decorating

Pre-Press Equipment

Sheet Processing Equipment

Closure Production

20181126_121431
B 1138
SACMI
PTC 27

Sheet Press for Crown Cork Production

Description

Sheet press for crown cork production.

Details
SACMI
PTC 27
27 crowns out x 27 strokes
(1995)
Crowns per sheet 729
Sheet size 1038 x 894 mm
Tooling for short corns 6,10 mm
Output: 242.100 cronws per hour
Notes

A technician from SACMI inspected the machine for an evaluation of its condition. The report is available upon request.

IMG_8852
B 1157
SACMI
PTC 027

Sheet Press for Crown Cork Production

Description

Sheet Press for Crown Cork Production

Details
SACMI
PTC 027
27 crowns out x 23 strokes
(1985)
Crowns per sheet 621
Sheet size 888 x 891 mm
Tooling short crowns 6,10 mm
Output with 152 strokes per min 235.980 crowns per hour
B 1022
B 1022
SACMI
PTC 170

Sheet Press for Crown Cork Production

Description

Sheet press for crown cork production.

Details
SACMI
PTC 170
Sheet press for the production of crown corks
(2001)
Sheet dimension 811,5 x 573 mm
Crowns per sheet 357
Press output at 172 strokes / min 2800 pc / min
Total power requirement of machine 9,14 KW
Voltage 380 V
Hertz 50 Hz
Compresses air requirements 500 dm³ / min at 5 bar
Machine weight including die set and feeder 58 kN
Notes

A technician from SACMI inspected the machine for an evaluation of its condition. The report is available upon request.

B1089 (1)
B 1089
SACMI
PMC 250

Crown Cork Liner

Description

Complete SACMI PMC 250 crown cork liner with profile 916.

Machine was overhauled in 2019 and can be inspected for a test production.

Details
SACMI
PMC 250
Complete crown cork liner with profile 916
(1994)
Notes

Optional Industrial Frigo GR1AC 80/Z/X/Z available for usage of PVC-free compound.

B 1148 (2)
B 1148
INDUSTRIAL FRIGO
GR2A 120/Z

Industrial Chiller

Description

INDUSTRIAL FRIGO chiller overhauled in 2020 available with guarantee suitable for crown cork lining machines.

Details
INDUSTRIAL FRIGO
GR2A 120/Z
Industrial Chiller
(2019)
Nominal cooling capacity 122 kW / 105.000 kcal/h
B 1069 (1)
B 1069
SACMI
CCE 60

Counting Units

Description

Counting units used for aluminium screw caps

Details
SACMI
CCE 60
Counting units for aluminium screw caps
Notes

Machines are in good working conditions

2
B1170-1
SACMI
PTV019

Press for aluminium caps

Description

Sheet feed press for aluminium closures

Details
SACMI
PTV019
Sheet feed press for aluminium caps. Output: 405 sheets per hour with 420 closures per sheet
(1993)
Format F1
Closure type RO
Diameter 28mm
Height of closure 13,1mm
SACMI
PTV019
Sheet feed press for aluminium caps. Output: 405 sheets per hour with 420 closures per sheet
(1992)
Format F1
Closure Type RO
Diameter 28mm
Height of closure 13,1mm
Notes

Machines are connected and in working conditions

 

Third press of year 1987 available as spare parts.

2
B1170-2
MATOCAPO

Rolling machines

Description

6 x MATOCAPO rolling machines with hopper and feeder for closure type RO

 

 

 

Details
MATOCAPO
Rolling machine Performance: approx. 80.000,00 aluminium closures per hour.
(1992)
Diameter 28mm
Height of closure 13,1mm
Number of rolling heads 8
MATOCAPO
Rolling machine Performance: approx. 80.000,00 aluminium closures per hour.
(1985)
Diameter 28mm
Height of closure 13,1mm
Number of rolling heads 8
MATOCAPO
Rolling machine Performance: approx. 80.000,00 aluminium closures per hour.
(1986)
Diameter 28mm
Height of closure 13,1mm
Number of rolling heads 8
B1040.1-3
B 1040-1
GRACE

PVC-Liner and Drying Oven for Twist-off Caps

Description

Liner and continuous drying oven for the production of twist-off closures. Suitable for diameter 48 mm and 53 mm.

Details
GRACE
Lining machine
Diameter 48 mm and 53 mm
NEITZ
Continuous drying oven
Width drying belt 1,0 m
Diameter 48 mm and 53 mm
Max. speed for diameter 53 mm 500 pcs/min
B1040.2-2
B 1040-2
GRACE

PVC-Liner and Drying Oven for Twist-off Caps

Description

Liner and continuous drying oven for the production of twist-off closures. Suitable for diameter 63 mm and 66 mm.

Details
GRACE
Lining machine
Diameter 63 mm and 66 mm
TAB
Continuous drying oven
Width drying belt 1,2 m
Max. speed for diameter 66 mm 800 pcs/min
B 1106-1
B 1106 Line

SACMI Production Linie for Plastic Closures

Description

Compression moulding line for 2-piece closures type HL 3 CSD. Size of closure 28 mm x 20 mm

Details
SACMI
CCM 01
Compression moulding machine
(1997)
SACMI
TVC 003
Folding machine
(1997)
SACMI
BTA 002
Cutting machine
(1997)
SACMI
PMV 200
Compound lining machine
(1997)
Notes

Total working hours: 114.000 hrs

Max. speed of the line 400 closures per mintue

Aluminium Tube Production

DIGITAL CAMERA
M 034

Various Slug Tumbler

Description

Various slug tumbler models overhauled for different filling quantities and with new electrical cabinets available

Notes

If not on stock, the working time for overhaul is approx. 6-8 weeks.

T 1180-1 (15)
T 1180-1
HERLAN
SP3

Impact Extrusion Press

Description

The machine worked in a production line covering a diameter range from 16 mm to 22 mm. Dismantling took place in September 2022.

Details
HERLAN
SP3
Impact extrusion press
(1972)
Impression cyliner available
Press tooling not available
Notes

Available for inspection in our warehouse.

T 1180-2
T 1180-2
HERLAN
TBE

Trimming Machine

Description

The machine worked in a production line convering a diameter range of 16 mm to 22 mm.  Expendable mandrels were used in production.

Details
HERLAN
TBE
Trimming machine
(1972)
Mandrels not available
Notes

Machine will be delivered without the following items:

  • control unit
  • size parts
T 1167
T 1167
MARTINENGHI
TTS

Trimming Machine

Description

Fully equipped trimming machine with size parts 25 mm – 28 mm – 30 mm – 31,2 mm and 32 mm.

Details
MARTINENGHI
TTS
Trimming machine
(1977)
Production speed 90 - 100 tubes per minute
Notes

Machine is connected and can be shown in a workshop.

Trimmer
T 1170-4
HERLAN
TBE

Trimming Machine

Description

Last production in a tube line covering a diameter range from 22 mm – 40 mm.

Details
HERLAN
TBE
Trimming machine
(1975)
Chain 5/8'' - 4-part pitch
Notes

Machine will be delivered without the following items:

  • Electrical cabinet
  • Size parts
  • Spare parts
T1122 (7)
T 1122
SPRIMAG
HIL-06

Internal Lacquering Machine

Description

Internal lacquering machine which used to work with 4 spraying guns. Production line covered a diameter range from 28 mm – 40 mm.

Details
SPRIMAG
HIL-06
Internal lacquering machine
(1980)
Speed 120 tube / min
Gun stroke 250 mm
Voltage 380 V
Hertz 50 Hz
Notes

Spraying guns are missing

T1170-3 (2)
T 1170-3
SPRIMAG
HIL-02

Internal Lacquering Machine

Description

SPRIMAG HIL-02 suitable for 3 spraying guns. Last production in a line covering tube diameter range 22 mm – 40 mm.

Details
SPRIMAG
HIL-02
Internal lacquering machine
(1974)
Working speed 65 tubes per minute
Electricity 400 V / 50 cycles
Max. tube length 200 mm
Notes

Machine will be delivered without the following items:

  • Electrical cabinet
  • Size parts
  • Spare parts
T1077 (8)
T 1077
SPRIMAG
HIL-32T

Internal Lacquering Machine

Description

Internal lacquering machine which used to work with 6 spraying guns and intermediate drying unit (electrically heated)

Details
SPRIMAG
HIL-32T
Internal Lacquering Machine
(1983)
Spraying guns 6
Tube diameter range 25 mm - 55 mm
Production speed 150 pcs/min
Electricity 380V / 50 cycles
Notes

Available size parts: 30 mm – 35 mm – 40 mm and 50 mm

Gun control equipped with Siemens S7 plc

T 1099 SPRIMAG_TIT serial number
T 1099
SPRIMAG
TIT 45-120/4

Internal Lacquering Oven

Description

Electrical lacquering oven which used to work in a production line covering a diameter range from 25 mm – 30 mm.

Details
SPRIMAG
TIT 45-120/4
Lacquering oven
(1973)
Speed max. 120 tpm
Drying time 4 min
Max. tube diameter 45 mm
max. tube length 220 mm
T 1180-3(1)
T 1180-3
HINTERKOPF
S157/7

Accumulator

Description

Accumulator with a capacity of approx. 500 tubes and equipped with a chain with a chain pitch of 5/8 « 

Details
HINTERKOPF
S157/7
Accumulator
(1974)
Notes

The machine can be inspected in our warehouse

T 1180-4
T 1180-4
HERLAN
LDT

Base Coating Machine

Description

Base coating machine available as spare part stock

Details
HERLAN
LDT
Base coating machine
(1972)
Notes

Machine will be delivered without the following items:

  • control unit
  • main drive
  • size parts

Plastic Tube Production

Aerosol Can Production

Can Making

Accessoires

HOCHBACH GmbH /
HOLAC

Raiffeisenstr. 16
70771 Leinfelden-Echterdingen
Allemagne
Google Maps

Telephone: +49 711 / 9 03 76-0
Telefax: +49 711 / 9 03 76-20

info@hochbach.de
https://www.hochbach.de

Interlocuteurs

Uwe Gregorius
ug@hochbach.de
+49 711 / 9 03 76-19
Géraldine Gaillard
gg@hochbach.de
+49 711 / 9 03 76-12
Hannes Knosp
knosp.hannes@hochbach.de
+49 711 / 9 03 76-30
Christiane Lechler
cl@hochbach.de
+49 711 / 9 03 76-17